Qianli iCopy Plus 2.2

Functions

Vibrator, light sensor, true tone board can help solve the problems for true tone, light-sensing function, or vibration function after replacing the screen.

True Tone

Available from iPhone 8 to 11 iPhone Pro Max
Copy the original screen’s chip data to a new screen, True Tone can be restored (The screen should be on the right side)
Under some special situations, like the original screen is lost or can not be read, use QianLi Repair helper software to restore the True Tone.

Vibrator Identification

Available from iPhone 7 to iPhone X

1. Connect the original vibrator to the corresponding connector
2. Click to read & copy the original vibrator’s data
3. Then write the data into a new vibrator

Baseband Logic EEPROM Data Read & Write

Available from iPhone 6, to iPhone XS Max
1. Connect the Baseband CPU chip relative pins to the board correspond zone by jumping a wire
2. Press the “Read” and “Write” buttons at the same time to enter into the Baseband programming interface
3. Click the “Read” button to acquire chip data

Notes of Qianli iCopy 2.2

Recently, the device could NOT support iPhone SE 2020.
The international version for the iCopy plus 2-generation of Qianli does not have a built-in battery. It needs to be plugged into the power supply for operation.
Make sure to use the support software on the computer with the Windows system (not macOS/MacBook).

Package Included

1 x iCopy Plus 2.2 Programmer
1 x True Tone Restore Board (For iPhone 8-11 Pro Max)
1 x Battery Repair Board (For iPhone 6-13 Pro Max)
1 x Lighting Cable Board

Additional information